DPL: streamline option building by ktf · Pull Request #15320 · AliceO2Group/AliceO2

ktf · 2026-04-24T11:47:27Z

Avoid too nested if conditions
Do not propagate --ccdb-fetchers for backward compatibility
in the on-the-fly generators
Avoid some copying

- Avoid too nested if conditions - Do not propagate --ccdb-fetchers for backward compatibility in the on-the-fly generators - Avoid some copying

alibuild · 2026-04-24T15:12:01Z

Error while checking build/O2/fullCI_slc9 for 72c4ba7 at 2026-04-24 17:11:

## sw/BUILD/O2-sim-challenge-test-latest/log
./sim-challenge.log[ERROR] Workflow crashed - PID 11656 (internal-dpl-aod-writer) did not exit correctly however it's not clear why. Exit code forced to 128.
./sim-challenge.log[ERROR]  - Device internal-dpl-aod-writer: pid 11656 (exit 128)
./sim-challenge.log[ERROR] SEVERE: Device internal-dpl-aod-writer (11656) returned with 128
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[1447:internal-dpl-clock]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[1476:SimReader]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/45}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/46}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/47}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/48}
./digi.log[1505:internal-dpl-ccdb-backend]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/49}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/37}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/38}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/40}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/42}
./digi.log[1592:TPCDigitizer_0]: [ERROR] Found duplicate input binding with different spec.:collisioncontext {SIM/COLLISIONCONTEXT/43}
[0 more errors; see full log]

Full log here.

alibuild · 2026-04-29T10:41:50Z

Error while checking build/O2/fullCI_slc9 for 8ecdc76 at 2026-05-13 08:46:

## sw/BUILD/O2-full-system-test-latest/log
command /sw/slc9_x86-64/O2/slc9_x86-64-slc9_x86-64-local20/prodtests/full-system-test/dpl-workflow.sh had nonzero exit code 128
[9113:internal-dpl-clock]: [ERROR] error parsing options of o2-dpl-run: unrecognised option '--buffer-size'
[ERROR] Workflow crashed - PID 9113 (internal-dpl-clock) did not exit correctly however it's not clear why. Exit code forced to 128.
[9115:internal-dpl-ccdb-backend]: [ERROR] error parsing options of o2-dpl-run: unrecognised option '--configKeyValues'
[ERROR] Workflow crashed - PID 9115 (internal-dpl-ccdb-backend) did not exit correctly however it's not clear why. Exit code forced to 128.
[9907:internal-dpl-injected-dummy-sink]: [ERROR] error parsing options of o2-dpl-run: unrecognised option '--buffer-size'
[ERROR] Workflow crashed - PID 9907 (internal-dpl-injected-dummy-sink) did not exit correctly however it's not clear why. Exit code forced to 128.
[ERROR] Workflow crashed - PID 9879 (TRD-Digits-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9468 (mean-vertex-calibration) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9168 (FT0TimeSpectraProcessor) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9143 (itsmft-deadmap-builder_its) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9803 (MFT-MFTClusterTask-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9776 (GLO-MTCITSTPC-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9477 (mch-error-merger) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9822 (MID-QcTaskMIDDigits-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9806 (MID-QcTaskMIDClust-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9738 (TRD-RawData-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9124 (mch-data-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9318 (rct-updater) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9484 (globalfwd-track-matcher) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9550 (zdc-tdccalib) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9713 (CPV-PhysicsOnEPNs-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9301 (tpc-vd-tgl-calib) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9149 (emcal-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9138 (calib-phos-l1phase) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9503 (secondary-vertexing) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9158 (phos-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9762 (FT0-DigitQcTaskFT0-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9116 (HMP-RawStreamDecoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9262 (mch-time-cluster-finder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9119 (EMCALRawToCellConverterSpec) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9244 (ft0-integrate-clusters) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9190 (MIDClusterizer) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9144 (itsmft-deadmap-builder_mft) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9152 (its-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9536 (ft0-merge-integrated-clusters) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9827 (MID-QcTaskMIDTracks-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9183 (zdc-tdccalib-epn) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9121 (mft-stf-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9717 (GLO-MUONTracks-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9742 (TRD-Tracking-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9296 (tpc-entropy-encoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9128 (fdd-datareader-dpl) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9120 (its-stf-decoder) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9182 (mft-tracker) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9176 (PHOSTurnonCalibDevice) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9862 (TOF-TaskDigits-proxy) was killed abnormally with Killed and exited code was set to 137.
[ERROR] Workflow crashed - PID 9565 (qc-task-EMC-RawTask) was killed abnormally with Killed and exited code was set to 137.
[0 more errors; see full log]

Full log here.

ktf requested a review from a team as a code owner April 24, 2026 11:47

DPL: streamline option building

72c4ba7

- Avoid too nested if conditions - Do not propagate --ccdb-fetchers for backward compatibility in the on-the-fly generators - Avoid some copying

ktf force-pushed the pr15320 branch from dca3f18 to 72c4ba7 Compare April 24, 2026 11:57

aalkin added 2 commits April 29, 2026 11:19

make sure that service devices are always spawned by the last workflow

f1a7767

make sure that service devices are always spawned by the last workflow

8ecdc76

alibuild mentioned this pull request Apr 29, 2026

Please consider the following formatting changes to #15320 ktf/AliceO2#382

Open

ktf closed this May 13, 2026

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

DPL: streamline option building#15320

DPL: streamline option building#15320
ktf wants to merge 3 commits into
AliceO2Group:devfrom
ktf:pr15320

ktf commented Apr 24, 2026

Uh oh!

alibuild commented Apr 24, 2026

Uh oh!

alibuild commented Apr 29, 2026 •

edited

Loading

Uh oh!

Reviewers

Assignees

Labels

Milestone

Development

Uh oh!

3 participants

Conversation

ktf commented Apr 24, 2026

Uh oh!

alibuild commented Apr 24, 2026

Uh oh!

alibuild commented Apr 29, 2026 • edited Loading Uh oh! There was an error while loading. Please reload this page.

Uh oh!

Uh oh!

Reviewers

Assignees

Labels

Milestone

Development

Uh oh!

3 participants

alibuild commented Apr 29, 2026 •

edited

Loading